March 2018

Hannover Messe 2018

Innovative solutions for industrial electronics

No picture available
  • April 23 to 27, 2018
  • Monday to Friday: 9:00 to 18:00
  • Hannover Exhibition Grounds, Hannover, Germany
  • Hall 13, Stand C66

Welcome to the Hannover Fair 2018! We are presenting our comprehensive and innovative portfolio of EPCOS components and systems for industrial electronics. The focus is on solutions for power factor correction, power quality and EMC filters.

Product highlights

Active harmonic filters optimize power quality

The EPCOS PQSine™ series of active harmonic filters significantly optimizes power quality. The modular filter systems are designed for 3-phase networks with and without neutral conductors at rated voltages up to 690 V AC at 50/60 Hz. The overall response time is <5 ms and the reaction time is <50 µs. PQSine active harmonic filters are able to analyze and neutralize current harmonics up to the 50th order. The core of the PQSine active harmonic filter is a controller. In contrast to classical power factor correction, which only corrects inductive loads, PQSine also compensates capacitive reactive power loads. In addition to their outstanding filtering, the PQSine active harmonic filters also balance the loads to all phases.

Further information

Minimizing leakage currents with LeaXieldTM

The EPCOS LeaXield™ active filter module is a solution for the minimization of earth leakage currents in power drive systems with frequency converters. Leakage current can cause RCDs (residual current device) to trip. In some applications this means that RCDs with low thresholds such as 30 mA cannot be used, or only with substantial additional expense. The LeaXield active filter module is connected between the RCD (residual current device) and the EMC input filter of the converter in standard three-phase industrial power grids and does not require an additional power supply.

LeaXield detects the common-mode currents on the load-side via a current sensing transformer. An amplifier generates an inverse of the leakage currents and feeds them to the power line via a capacitor network. This produces almost complete cancellation of the leakage currents. LeaXield is now designed for rated currents of up to 150 A for 3-phase grids at frequencies of 50/60 Hz and a rated voltage of 520 V AC. The new active filter can be used in systems with leakage currents of up to 1000 mA.

Besides minimizing earth leakage currents, LeaXield active filter modules can also improve the EMC performance of power drive systems in the range up to around 500 kHz. The new active filter module achieves typical common-mode attenuation values of up to 30 dB at 4 kHz, 40 dB at 10 kHz, and 15 dB at 150 kHz.

The EPCOS LeaXield module can be retrofitted into existing converter-based installations in order to improve their EMC and the RCD compatibility of the power drive system. Moreover, LeaXield circuits can be integrated into new EMC filter solutions in order to downsize the expensive current-compensated filter chokes. 

Product inquiry

PFC capacitors offer higher inrush current

The two series of EPCOS PhaseCap® Energy for power factor correction offer a significantly higher performance. The components are available with gas or resin-filled housings. They are designed for voltages of 230 V AC to 690 V AC and offer a reactive power of between 5 kvar and 33 kvar.

The life expectancy of the B25674* series of gas-impregnated capacitors has been possible to extend by nearly 40 percent from 130,000 to 180,000 hours. The maximum permissible inrush current was also increased by 25 percent to 500 x IR. The new capacitors can also be switched significantly more frequently: For example, the maximum number of switching cycles per year has been doubled from 7500 to 15,000. The maximum permissible operating temperature as per IEC 60831-1 has also now been raised by 5 K to 60 °C.

The B25675* series of resin-filled capacitors features an even longer life expectancy of 200,000 hours and is likewise designed for a maximum operating temperature of 60 °C and a maximum permissible inrush current of 500 x IR.

A further significantly improved feature of both series is their increased energy density in comparison with the existing types: For the 28 kvar / 440 V types, for example, this has been raised by more than 20 percent from 9.7 kvar/l to 11.8 kvar/l. This also results in compact dimensions: The new PhaseCap Energy capacitors feature a diameter of between just 75 mm and 125 mm, depending on the type, and a height of between 164 mm and 224 mm. 

Further information



Read more