Search for article
|
InductorsRobust 3D transponder coils with high sensitivity for automotiveTDK Corporation presents a new series of 3D transponder coils for passive entry passive start (PEPS) and other access systems. Measuring just 11.5 mm x 12.5 mm x 3.6 mm, the B82453C*A* series features six types of 3D transponder coils that offer sensitivity levels from 45 mV/µT to 83 mV/µT. June 2017
|
|
High-voltage contactorsHigh continuous current capability of 200 ATDK Corporation presents the new HVC200A bipolar high-voltage contactor for the switching of high DC voltages and currents. It is designed for operating voltages of up to 450 V DC and a high continuous current of 200 A. June 2017
|
|
EMC componentsWorld's smallest common-mode choke for automotive EthernetTDK Corporation presents the ACT1210L common-mode choke – the world's smallest of its type for automotive Ethernet applications. Its dimensions are just 3.2 mm x 2.5 mm x 2.5 mm, making it just half the size of the existing ACT45L choke which measures in at 4.5 mm x 3.2 mm x 2.8 mm. Series production of the new common-mode chokes starts in June 2017. June 2017
|
|
Angle sensorsTMR Angle Sensor with digital outputTDK Corporation presents the new TMR angle sensor TAD2141 with digital output. The new sensor offers a guaranteed accuracy of ±0.2° and at room temperature achieves the industry’s highest accuracy for angle error of only ±0.05°. The sensor is capable of contactless sensing 360° within a temperature range of -40 °C to +150 °C. June 2017
|
|
Inertial sensorsMiniaturized MEMS accelerometer with excellent linearityTDK Corporation announces the Tronics AXO215 high-performance MEMS accelerometer that sets the benchmark in terms of miniaturization, reliability and inertial sensing performance in harsh environments. June 2017
|
|
Noise suppression sheetsUltra-thin magnetic sheets with high permeabilityTDK Corporation has expanded its Flexield family of noise suppression sheets with an ultra-thin copper-clad laminated sheet with high magnetic permeability. The new IFM10M magnetic sheets are 60 percent thinner than existing sheets with a magnetic layer of the same thickness. May 2017
|
|
InductorsChoke for automotive power over coaxTDK Corporation presents the new ADL3225V choke for automotive power over coax (PoC) applications. The wire wound inductor, which has a DC resistance of 0.9 Ω, features high impedance over a broad frequency spectrum of 1 MHz up to 1 GHz. April 2017
|
|
Ceramic capacitorsCeraLink™ types with higher rated voltageTDK Corporation has extended the CeraLink™ series with two low-profile (LP) types designed for a rated voltage of 900 V DC. The SMT capacitors have a capacitance of 0.25 µF and feature different terminations: the B58031I9254M062 type with L-style termination has dimensions of 10.84 mm x 7.85 mm x 4 mm, while the B58031U9254M062 with J-style termination measures only 7.14 mm x 7.85 mm x 4 mm. March 2017
|
|
EMC components and inductorsFirst chip beads and inductors with robust soft terminationTDK Corporation presents the world’s first multilayer chip beads and inductors with the innovative soft-termination technology that is already proven in TDK MLCCs. The external electrodes of the new KMZ1608 and KPZ1608 series of chip beads and the KLZ1608 and KLZ2012 series of inductors feature a conductive resin layer. March 2017
|
|
EMC componentsMiniaturized LC filters for suppression of EMITDK Corporation presents the MEM1005PP251T – a new LC filter for EMI suppression. With dimensions of just 1.0 x 0.5 x 0.35 mm the filters are ideally suited for use in smart phones and base stations. Volume production began in March 2017. March 2017
|
|
Actuators with haptic feedbackUltra-thin PiezoHapt™ actuator with low driving voltageTDK has expanded its portfolio of haptic components with the new ultra-thin PiezoHapt™ actuator featuring a very short response time of just 4 ms. PiezoHapt has a unimorph design consisting of a multilayer piezo element bonded to one side of a vibration plate. With a thickness of a mere 0.35 mm the new haptic actuator is much thinner than conventional eccentric rotary motors and linear resonant actuators, and one of the world's thinnest haptic devices. February 2017
|
|
Multilayer ceramic chip capacitorsExpanded lineup of automotive-grade MLCCs for high-temperature applicationsTDK Corporation has expanded its CGA series of automotive-grade MLCCs for high-temperature applications: New MLCCs with X8L temperature characteristics have been introduced and the capacitance range of its existing X8R types has been extended. January 2017
|
|
InductorsLow loss thin-film metal inductors with high current capability for power supply circuitsTDK Corporation presents the new TFM160808ALC thin-film inductor for power supply circuits, which features a maximum DC resistance of 62 mΩ that is 30 percent lower than for existing types (e.g. TFM160808ALM, 0.47 μH). The new type, whose compact dimensions are just 1.6 mm x 0.8 mm x 0.8 mm, also offers a high rated current of 2.6 A and an inductance of 0.47 μH. January 2017
|
|
Film capacitorsRobust industrial grade X2 capacitors with a rated voltage of 350 V ACTDK Corporation presents a new series of robust EPCOS MKP X2 capacitors for EMI suppression. Compared with conventional X2 capacitors designed for rated voltages of 305 V AC, these new components offer a higher rated voltage of 350 V AC. January 2017
|
|
InductorsSMT high-current chokes with a compact designTDK Corporation has extended its portfolio of EPCOS ERU SMT power inductors with the ERU16 choke series that comprises ten different types. The inductance values of the new B82559*A016 series extend from 1.0 µH to 30 µH and their saturation currents range from 9.2 A DC to 37 A DC. December 2016
|
|
Multilayer ceramic chip capacitorsAutomotive-grade soft-termination and MEGACAP Type MLCCs with C0G characteristicsTDK Corporation has expanded its lineup of automotive-grade soft-termination and MEGACAP Type MLCCs with new C0G types. Until now, these robust MLCC designs, which offer effective protection against board flexure and solder cracks, have been available with X5R, X7R and X8R dielectric materials. November 2016
|
|
CeraPad™Ultra-thin substrate with integrated ESD protectionTDK Corporation presents CeraPad™, a new ultra-thin ceramic substrate that features integrated ESD protection within its multilayer structure and eliminates the need for discrete ESD components. November 2016
|
|
Aluminum electrolytic capacitorsFirst ever vibration strength of 60 gTDK Corporation presents the first aluminum electrolytic capacitors that are specified for 60 <I>g</I> in accordance with IEC 60068-2-6. The new generation offers the highest vibration strength and the best electrical performance in a single component. November 2016
|
|
PowerHap™ piezo actuators with haptic feedbackNew dimensions in performanceTDK Corporation presents the innovative PowerHap™ piezo actuator with haptic feedback and integrated sensor functionality. The new actuator features unrivalled performance in terms of acceleration, force and response time. November 2016
|
|
Film capacitorsMKP types for up to 125 °CTDK Corporation presents a new series of EPCOS MKP (metallized polypropylene) film capacitors for DC link and DC filter applications. The outstanding feature of these components is their high permissible operating temperature of 125 °C. November 2016
|
